+86 152 6532 9613

Prepainted Galvanized Coil

Our PPGI (Pre Painted Galvanised Steel) & PPGL (Pre Painted Galvalume Steel) are available in a variety of specifications.


  • Standards: JIS G3302, JIS G3313, ASTM A653, GB/T2518-88, GB11253-89, BS, ect.
  • Steel Gardes: TDC51D2,TDC51D+AZ,TDC51D, GR.A, GR. B, SPCC, SPHC, DX51D, ect.
  • Thickness: 0.14mm-1.2mm
  • Zinc Thickness: 30-275g/m2
  • Width: 600mm-1250mm
  • Length: As Your Requirement


Thickness 0.14mm-1.2mm
Width 600mm-1250mm
Single weight Max 6.0MT
Zinc thickness 30-275g/m2
Steel gardes TDC51D2,TDC51D+AZ,TDC51D, GR.A, GR. B, SPCC, SPHC, DX51D, ect.
Standard JIS G3302, JIS G3313, ASTM A653, GB/T2518-88, GB11253-89,, BS, ect.
Packing Wrapped by plastic film and waterproof paper, and then fastened on wooden pallet. Or as you request.
Used Used in building material, roof, profile,pipe making, furniture making, etc.
Minimum quantity Can be 25MT
Price FOB Tianjin Port or Qingdao Port 600-950USD/MT
Delivery time within 25 days after receiving 30% deposit or copy of LC at sight
Payment terms T/T or L/C
Supply ability 10,000 MT per month

Material Composition Sheet:

Steel Grade Chemical Composition (%) Mechanic Property C.B of Coating Coating
C Si Mn S P T.S Y.S E.L
x103 x103 x102 x103 x103 Mpa Mpa % D=0 180° G/M²
JIS G3302 SGCC 12 30 41 31 21 480 300 13 OK Z60-150
JIS G3302 SGCH 12 10 21 18 8 680 650 OK Z60-150
ASTM A653 CS.B 20 30 60 35 30 386 205-380 20 OK Z60-275
DX51D+Z 29 21 18 1.8 11 355 245 38 OK Z60-275
G550 20 6 73 5 17 715 654 8 OK Z60-275


Category of Painting Item Code
Polyester PE
High-durability polyester HDP
Silicon modified polyesters SMP
Polyvinylidene fluoride PVDF
Painting Thickness Top side: 20+5microns;
Bottom side: 5~7microns.
Color System Produce according to RAL Color System or as per buyer’s color sample.
Painting structure Top surface Bottom surface, ,
Primer coating No coating 1/0
Primer coating Primer coating 1/1
Primer coating + Finish coating No coating 2/0
Primer coating + Finish coating Primer coating or single back coating 2/1
Primer coating + Finish coating Primer coating + Finish back coating 2/2

MCL Process:


Please feel free to call us on (telephone +86 152 6532 9613) or contact by (email contact[@]lghonge.com), if you require any further information.